Elite Greenhouse Accessories

5' ALLOY BASE *

A feature of the Elite greenhouse base is the expandable corners thus allowing the base to be marginally increased or reduced in size to precisely fit the greenhouse cill. The base is made of sturdy aluminium with double bolt slots and strengthening ribs. The greenhouse sits on top of the flange and is bolted to it. Dependant upon base size, there are at least 4 anchoring points which can be concreted into the ground. Available in aluminium or colour coded to suit your greenhouse.

LOUVRE WINDOWS *

Ventilation is essential in any greenhouse and the Elite 5 blade louvre panel will aid through ventilation. Available in aluminium or powder coated finish with either horticultural or toughened glass.

RAINWATER KIT*

Don't waste the water collected by your greenhouse roof.

Elites rainwater kit includes two downpipes (one for each side of the greenhouse) and is complete with 2 guttering endstops.

RAINWATER CONNECTING KIT *

Similar to the standard kit above but with traverse pipe across the back of greenhouse to a T junction which effectively connects both gutters to one outlet

AUTO VENT

Automatic roof vent opener easily fitted to greenhouse roof vents will increase or reduce ventilation automatically according to the temperature, ensuring the desired balance of heat and humidity. Requires no power as it operates by solar energy
(may vary slightly from illustration)

ELITE BAR CAPPING *

Bar capping is a continous strip glazing system used instead of glazing clips. This gives a clean finish to the greenhouse covering the edges of the glazing and glazing bars to prent the build up of unsightly moss, etc. It is made from ridgid PVC and is UVI treated. Only available with full sheet toughened glass

ELITE BUTYL MASTIC BEADING

Butyl mastic beading strip to form a cushion between greenhouse framework and glass. Grey and pliable this beading may be used to replace glazing strip on most greenhouse makes. available in 20' or 200' rolls.

200' is sufficient to completely reglaze the average 6 x 8 greenhouse
400' is more than enough for an 8 x 14

WIDE RANGE OF GREENHOUSE STAGING

see the full range on our staging page

ALUMINIUM SLATTED STAGING

The addition of our free standing and easily assembled 1200mm (4ft) aluminium staging will not only provide you with extra work space and storage, it will also stop you having to bend and strain your back!
Available in single and double tier Height 30" Width 20.5"

NUTS & BOLTS ETC...

NUTS BOLTS & CLIPS

Glazing clips (top left) Clips that hold the panes of glass to the glazing bars in your greenhouse frame. Only necessary if original clips are lost or broken.

Screw Hooks (top right) These fit into the channel in the glazing bars, allowing items to be hung from them or for climbing wires to be fixed.

Nuts & Bolts (bottom left) Fit most aluminium greenhouses. Use to replace most nuts & bolts.

Retaining Clips (bottom centre) Z shaped clips that prevent the roof panes of glass from sliding off.

Cropped Head Nuts & Bolts (bottom right) Cropped head bolts to allow them to fit easily to the glazing bar. The accessory is then put on to the bolt